Changsha Drilling Machinery CO., LTD
Changsha Drilling Machinery CO., LTD
Add to Cart
XY-5L Surface Coring Rig
Description
XY-5L drill rig is a spindle core drilling rig supplied based on demands of diamond drilling, wire line coring, etc. for engineering geological exploration, small-scale water well drilling and engineering construction for highway, railroad, hydropower, harbor, and so forth. Track chassis is added to this drill rig to facilitate move and operation
Features
1: this spindle core drilling rig and its support equipment, including drill tower, mud pump, coring winch, etc. are mounted on the track chassis to allow moving of the whole machine and high overall efficiency as well as reduce labor intensity
2: a wide rotational speed range is available for this drill rig to satisfy demonds of diamond coring drill, directional drilling, rotary percussion drilling, reverse circulation continuous sampling, etc.
3: hydraulic lifting drill tower allows flexible drilling operation
4: the major part of the drill rig mud pump and coring winch are respectively driven by independent power to facilitate operation and maintenance as well as reduce energy consumption and drilling costs
5: the hydraulic system is equipped with dual oil pumps allowing faster deeding and drilling
6: equipped with automatic transmission, clutch, universal drive shaft and other high quality general parts, this spindle core drilling rig enjoys long service life and easy replacement
Specifications
| Basic | Power machine | Diesel engine |
| Model | 4BTA3.9-C100 | |
| Power (KW) | 74 (2200 r/min) | |
| Drilling capacity |
Drilling depth of BQ drill rod: 1800m Drilling depth of NQ drill rod: 1400m Drilling depth of HQ drill rod: 900m |
|
| Gyrator | Spindle rotational speed (r/min) |
FWD: 47; 76; 123; 152; 190; 246; 270; 360; 400; 613; 869; 1161 REV: 51; 163 |
| Max. torque of vertical spindle (Nm) | 6800 (76 r/min) | |
| Vertical spindle diameter (mm) | 93 | |
| Hoist capacity (KN) | 150 (rated) | |
| Pressing capacity (KN) | 80 (rated) | |
| Feed stroke (mm) | 800 | |
| Winch | 3-layer single rope hoist capacity (KN) | Max. 60 |
| 3-layer single rope hoist speed (m/s) | 0.79; 1.27; 1.96; 2.78; 3.71 | |
| Winch diameter (mm) | 300 | |
| Ire rope diameter (mm) | 20 | |
| Drum capacity (m) | 100 | |
| Hydraulic system | Model of oil pump | 63SCY14-1BF(plunger pump) + SGP1A16RF(gear pump) |
| Oil pump displacement (ml/min) | 63+16 | |
| System pressure (Mpa) | 12 Mpa, 25Mpa while travelling | |
| Oil cylinder stroke (mm) | 500 | |
| Drill tower | Height tower (m) | 11.7 |
| Load of drill tower (KN) | 300 | |
| Drill angle | 45°~ 90° | |
| Track chassis | Carrying capacity (T) | 10 |
| Travelling speed (km/h) | 1.5 ~ 2 | |
| Max. traction (kgs) | 10250 | |
| Angle of climb | 30° | |
| Wireline winch | Hoist force of bare drum (kgs) | 1200, full rope: 400 |
| Linear speed of full drum (m/s) | 2 | |
| Wire rope capacity for 5.3mm (m) | 1500 | |
| Dimension (L*W*H) (mm) | 4500*3300*11700 | |
| Total weight (T) | Approx. 11.5 | |